AsteriskWin32 PBX 0.66 connect to the conventional telephone network PSTN, ISDN Lines (BRI & PRI), CELLULAR Network and conventional phones devices.
PSTN Connection :
FX channel (chan_fx),
use FXOS/FXS Telephony board.
TAPI channel (chan_tapi),
use TAPI 2.0 compatible
hardware.
ISDN Connection :
CAPI channel (chan_capi),
use CAPI 2.0 based hardware .
CELLULAR Network Connection :
CELLIAX channel (chan_celliax), use audio driver for GSM and CDMA cellular phones.
COMPATIBLE FEATURES:
FXO/FXS Boards |
|||||||||||||
DTMF Detection |
Audio Format |
Full-Duplex |
Hangup Detection |
Progress Detection |
Call Hold |
Call Transfer |
Caller ID |
Called ID |
Redirector ID |
||||
FXO/FXS Boards |
8kHz 16Bit |
||||||||||||
ISDN Boards |
|||||||||||||
DTMF Detection |
Audio Format |
Full-Duplex |
Hangup Detection |
Progress Detection |
Call Hold |
Call Transfer |
Caller ID |
Called ID |
Redirector ID |
||||
CAPI c/Boards |
8kHz 16Bit |
||||||||||||
RCAPI Routers |
8kHz 16Bit |
||||||||||||
TAPI based Boards |
|||||||||||||
DTMF Detection |
Audio Format |
Full-Duplex |
Hangup Detection |
Progress Detection |
Call Hold |
Call Transfer |
Caller ID |
Called ID |
Redirector ID |
||||
TAPI b/Boards |
8kHz 16Bit |
||||||||||||
Voice Modems |
|||||||||||||
DTMF Detection |
Audio Format |
Full-Duplex |
Hangup Detection |
Progress Detection |
Call Hold |
Call Transfer |
Caller ID |
Called ID |
Redirector ID |
||||
Voice Modems |
8kHz 16Bit |
||||||||||||
Cellular Network |
|||||||||||||
DTMF Detection |
Audio Format |
Full-Duplex |
Hangup Detection |
Progress Detection |
Call Hold |
Call Transfer |
Caller ID |
Called ID |
Redirector ID |
||||
CELLIAX |
8kHz 16Bit |
||||||||||||
supported | supported with restriction | unsupported |
TESTED HARDWARE:
FXO/FXS Boards | ||||||
Manufacturer | Model | Interface |
Lines |
Status |
Notes | |
DIGIUM | X100P & X101P | 1 analog |
1 |
ok |
support w/ FXOS Telephony Interface | |
DIGIUM | TDM400P | 4 analog |
4 |
support available in 02/2008 | ||
PIKA TECHNOLOGIES | LOW DENSITY ANALOG w/DSP | 4 analog |
4 |
support available in 02/2008 | ||
SANGOMA | A200 ANALOG | 4 analog |
4 |
support available in 02/2008 |
ISDN Boards | ||||||
Manufacturer | Model | Interface |
Lines |
Status |
Notes | |
AVM | Fritz! Card | BRI-S0 |
2 |
ok |
passive board | |
BILLION | ISDN PCI TA | BRI-S0 |
2 |
ok |
passive board | |
EICON | DIVA ISDN | BRI-S0 |
2 |
ok |
passive board | |
EICON | DIVA SERVER | BRI-S0 |
2 |
ok |
active board |
ISDN Router with Remote CAPI support | ||||||
Manufacturer | Model | Interface |
Lines |
Status |
Notes | |
CISCO | 800 Series (801/802) | BRI-S0 |
2 |
ok |
||
ZyXEL | Prestige 201/202/480 | BRI-S0 |
2 |
ok |
European models only | |
BINTEC | ??? | BRI-S0 |
2 |
not tested |
TAPI based Boards | ||||||
Manufacturer | Model | Interface |
Lines |
Status |
Notes | |
INTEL DIALOGIC | D41/ESC | 4 analog |
4 |
with TAPI wave drivers |
Manufacturers: Hardware donation is welcome, to see your boards tested and listed here.